Zachodniopomorski Uniwersytet Technologiczny w Szczecinie

2023

  1. Cuevas K., Strzałkowski J., Kim J-S., Ehm C., Glotz T., Chougan M., Ghaffar S.H., Stephan D., Sikora P. Towards development of sustainable lightweight 3D printed wall building envelopes – experimental and numerical studies. Case Studies in Construction Materials (2023) e01945. https://doi.org/10.1016/j.cscm.2023.e01945
  2. Sikora P., El-Khayatt A.M., Saudi H.A., Liard M., Lootens D., Chung S.-Y., Woliński P., Abd Elrahman M. Rheological, mechanical, microstructural and radiation shielding properties of cement pastes containing magnetite (Fe3O4) nanoparticles. International Journal of Concrete Structures and Materials (2023), 17, 7. https://doi.org/10.1186/s40069-022-00568-y
  1. Rathnarajan S, Sikora P. Seawater-mixed concretes containing natural and sea sand aggregates A review. Results in Engineering (2023) 20, 101457, https://doi.org/10.1016/j.rineng.2023.101457
  1. Sikora P., Afsar L., Rathnarajan S., Nikravan M., Chung S-Y., Stephan D., Abd Elrahman M. Seawater-Mixed lightweight aggregate concretes with dune sand, waste glass and nanosilica: experimental and life cycle analysis. International Journal of Concrete Structures and Materials (2023) 17:47. https://doi.org/10.1186/s40069-023-00613-4
  1. Techman M., Skibicki S., Chougan M., El-Khayatt A.M., Saudi H.A., Błyszko J., Abd Elrahman M., Chung S-Y., Sikora P. Development of 3D printed heavyweight concrete (3DPHWC) containing magnetite aggregate. Materials and Design (2023), 233, 112246, https://doi.org/10.1016/j.matdes.2023.112246
  1. Al-kroom H., Abd Elrahman M., Meddah M.S., Arif M., Sikora P., Stephan D., Abdel-Gawwad H.A. The impact of red clay brick and perlite wastes on the reusability of katoite-based binder after exposure to elevated temperatures. Materials Letters (2023) 353, 135281. https://doi.org/10.1016/j.matlet.2023.135281
  1. Cendrowski K., Federowicz K., Techman M., Chougan M., K dzierski T., Sanytsky M., Mijowska E., Sikora P. Boosting the fresh and early age performance of Bi2O3 and Gd2O3 particles in Portland cement pastes via sol-gel silica coatings. Coatings (2023) 13(10), 1698, https://doi.org/10.3390/coatings13101698
  1. Abbass A.M., Abd Elrahman M., Sikora P., Strzałkowski J., Stephan D., Abdel-Gawwad H.A. From dolomite waste to katoite-based binder: Synthesis, performance and characterization. Journal of Building Engineering (2023), 75, 106971, https://doi.org/10.1016/j.jobe.2023.106971

2022

  1. Nowak R.., Kania T., Rutkowski R., Ekiert E.: Research and TLS (LiDAR) Construction Diagnostics of Clay Brick Masonry Arched Stairs. Materials (2022) 15, 2. https://doi.org/10.3390/ma15020552
  2. Chougan M., Ghaffar S.H., Sikora P., Mijowska E., Kukułka W, Stephan D. Boosting Portland cement-free composite performance via alkali-activation and reinforcement with pre-treated functionalised wheat straw. Industrial Crops and Products (2022) 178, 114648. https://doi.org/10.1016/j.indcrop.2022.114648
  3. Skibicki S., Jakubowska P., Kaszyńska M., Sibera D., Cendrowski K., Hoffman M., Early-Age Mechanical Properties of 3D-Printed Mortar with Spent Garnet, Materials (2022), 15(1), 100; https://doi.org/10.3390/ma15010100
  4. Morawski A. W., Ćmielwska K., Witkowski K., Kusiak-Nejman E., Pełech I., Staciwa P., Ekiert E., Sibera D., Wanag A., Gano M., Narkiewicz U., CO2 Reduction to Valuable Chemicals on TiO2-Carbon Photocatalysts Deposited on Silica Cloth, Catalysts (2022), 12(1), 31;
  5. Sikora P., Chougan M., Cuevas K., Liebscher M., Mechtcherine V., Ghaffar S.H., Liard M., Lootens D., Krivenko P., Sanytsky M., Stephan D. The effects of nano- and micro-sized additives on 3D printable cementitious and alkali-activated composites: a review. Applied Nanoscience (2022) 12, 805-823. https://doi.org/10.1007/s13204-021-01738-2
  6. Abdel-Gawwad H.A., Mohammed A.H., Arif M.A., Shoukry H., Abadel A.A., Al-Kroom H., Sikora P., Abd Elrahman M. Role of magnesium chloride in the performance and phase composition of lead glass sludge foam. Materials Letters (2022) 320, 132325. https://doi.org/10.1016/j.matlet.2022.132325
  7. Augustyniak A., Jablonska J., Cendrowski K., Głowacka A., Stephan D., Mijowska E., Sikora P. Investigating the release of ZnO nanoparticles from cement mortars on microbiological models. Applied Nanoscience (2022) 12, 489-502. https://doi.org/10.1007/s13204-021-01695-w
  8. Pełech I., Staciwa P., Sibera D., Kusiak-Nejman E., Morawski A. W., Kapica-Kozar J., Narkiewicz U., The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2. Molecules (2022) 27(4), 1387. https://doi.org/10.3390/molecules27041387
  9. Morawski A. W., Kusiak-Nejman E., Pełech I., Ćmielewska K., Sibera D., Staciwa P., Wanag A., Gano M., Ekiert E., Kapica-Kozar J., Witkowski K., Narkiewicz U., New Insight on Carbon Dioxide-Mediated Hydrogen Production. Chemistryopen (2022) 11(4), e202100262. https://doi.org/10.1002/open.202100262
  10. Skibicki S., Pułtorak M., Kaszyńska M., Hoffmann M., Ekiert E., Sibera D., The effect of using recycled PET aggregates on mechanical and durability properties of 3D printed mortar. Construction and Building Materials (2022) 335, 127443. https://doi.org/10.1016/j.conbuildmat.2022.127443
  11. Nowak R., Badania i ocena nośności ceglanych sklepień i łuków w skali naturalnej. Wydawnictwo Uczelniane Zachodniopomorskiego Uniwersytetu Technologicznego w Szczecinie (2022). ISBN 978-83-7663-333-6
  12. Sikora P., Woliński P., Chougan M., Madraszewski S., Węgrzyński W., Papis B.K., Federowicz K., Ghaffar S.H., Stephan D. A systematic experimental study on biochar-cementitious composites: Towards carbon sequestration. Industrial Crops and Products (2022) 184, 115103. https://doi.org/10.1016/j.indcrop.2022.115103
  13. Chougan M, Ghaffar SH, Mijowska E, Kukułka W, Sikora P. High-performance polylactic acid compressed strawboard using pre-treated and functionalised wheat straw. Industrial Crops and Products (2022) 184, 114996. https://doi.org/10.1016/j.indcrop.2022.114996
  14. Abdel-Gawwad H.A., Sikora P., Mohammed A.H., Arif M.A., Al-Kroom H., Abd Elrahman M. Resistance of alkali-activated slag mixed with wastewater towards biogenic sulfuric acid attack. Case Studies in Construction Materials (2022) 17, e01164. https://doi.org/10.1016/j.cscm.2022.e01164
  15. Cendrowski K., Kukułka W., Mijowska E., Silica nanospheres as a key process element in the Green engineering for the synthesis of carbon nanotubes as a supercapacitors additives. Materials Research Bulletin (2022) 111620. https://doi.org/10.1016/j.materresbull.2021.111620
  16. Jabłońska J., Dubrowska K., Augustyniak A., Wróbel R.J., Piz M., Cendrowski K., Rakoczy R., The influence of nanomaterials on pyocyanin production by Pseudomonas aeruginosa. Applied Nanoscience (2022). https://doi.org/10.1007/s13204-022-02461-2
  17. Augustyniak A., Dubrowska K., Jabłońska J., Cendrowski K., Wróbel R.J., Piz M., Filipek E., Rakoczy, R., Basic physiology of Pseudomonas aeruginosa contacted with carbon nanocomposites. Applied Nanoscience (2022). https://doi.org/10.1007/s13204-022-02460-3
  18. Morawski A. W., Ćmielewska K., Ekiert E., Kusiak-Nejman E., Pełech I., Staciwa P., Sibera D.,  Wanag A., Kapica-Kozar J., Gano M., Lendzion-Bieluń Z., Narkiewicz U., Effective green ammonia synthesis from gaseous nitrogen and CO2 saturated-water vapour utilizing a novel photocatalytic reactor. Chemical Engineering Journal (2022) 446(3), 137030. https://doi.org/10.1016/j.cej.2022.137030.
  19. Sikora P., Techman M., Federowicz K., El-Khayatt A.M., Saudi H.A., Abd Elrahman M., Hoffmann M., Stephan D., Chung S.Y.: Insight into the microstructural and durability characteristics of 3D printed concrete: Cast versus printed specimens. Case Studies in Construction Materials (2022) Volume 17. https://doi.org/10.1016/j.cscm.2022.e01320.
  20. Abdel-Gawwad H.A., Tawfik T.A., Sikora P., Abd Elrahman M. Preparation and characterization of a novel alkali-activated magnesite cement. Construction and Building Materials (2022) 345, 128384. https://doi.org/10.1016/j.conbuildmat.2022.128384
  21. Paczkowski W., Kozieł K. Skibicki S., Matyl M., Wiśniowski M., Wróblewski T., Wzmocnienie uszkodzonej stalowej konstrukcji nośnej elektrowni w celu przejęcia dodatkowych obciążeń, Monografia awarie budowlane : zapobieganie, diagnostyka, naprawy, rekonstrukcje, ISBN: 9788376633374 , 2022
  22. Skibicki S., Ocena jakości ściany wykonanej w technologii druku 3D za pomocą systemu analizy obrazu, Inżynieria i Budownictwo, nr 3-4, 2022
  23. Skibicki S., Kaszyńska M., Problemy w technologii druku 3D kompozytów cementowych, Budownictwo, Technologie, Architektura, nr 2(98), 2022
  24. Skibicki S., Zieliński A., Kaszyńska M., Nowak, AS., Analiza sztywności połączenia segmentów stalowych barier tymczasowych do separacji ruchu, Materiały Budowlane, nr 12, 2022
  25. Chougan M., Ghaffar S.H., Nematollahi B., Sikora P., Dorn T., Stephan D.,Albar A., Al-Kheetan M.J. Effect of natural and calcined halloysite clay minerals as low-cost additives on the performance of 3D-printed alkali-activated materials. Materials and Design (2022) 223, 111183. https://doi.org/10.1016/j.matdes.2022.111183
  26. Morawski A. W., Ćmielwska K., Ekiert E., Kusiak-Nejman E., Pełech I., Staciwa P., Sibera D., Wanag A., Kapica-Kozar J., Gano M., Lendzion-Bieluń Z., Narkiewicz U., Effective green ammonia synthesis from gaseous nitrogen and CO2 saturated-water vapour utilizing a novel photocatalytic reactor. Chemical Engineering Journal (2022) 446(3), 137030. https://doi.org/10.1016/j.cej.2022.137030
  27. Pełech I., Staciwa P., Sibera D., Pełech R., Sobczuk K. S., Kaylar G. Y., Narkiewicz U., Cormia R., CO2 Adsorption Study of Potassium-Based Activation of Carbon Spheres. Molecules (2022) 27(17), 5379. https://doi.org/10.3390/molecules27175379
  28. Pełech I., Kusiak-Nejman E., Staciwa P., Sibera D., Kapica-Kozar J., Wanag A., Latzke F., Pawłowska K., Michalska A., Narkiewicz U., Morawski A. W., CO2 Sorbents Based on Spherical Carbon and Photoactive Metal Oxides: Insight into Adsorption Capacity, Selectivity and Regenerability. Molecules (2022) 27(20), 6802. https://doi.org/10.3390/molecules27206802

2021

  1. Federowicz K., Techman M., Sanytsky M., Sikora P.: Modification of Lightweight Aggregate Concretes with Silica Nanoparticles—A Review. Materials (2021) 14 (15) 1-23. https://doi.org/10.3390/ma14154242
  2. Kania T., Derkach V., Nowak R.: Testing Crack Resistance of Non-Load-Bearing Ceramic Walls with Door Openings. Materials (2021) 14 (6) 1-21. https://doi.org/10.3390/ma14061379
  3. Nowak R., Orłowicz R.: Testing of Chosen Masonry Arched Lintels. International Journal of Architectural Heritage Conservation, Analysis and Restoration (2021) 15 (12) https://doi.org/10.1080/15583058.2020.1735573
  4. Skibicki S., Półtorak M., Kaszyńska M.: Evaluation of Material Modification using PET in 3D Concrete Printing Technology. IOP Conference Series: Materials Science and Engineering (2021) 1044, 1-6. https://doi.org/10.1088/1757-899X/1044/1/012002
  5. Hoffmann M., Żarkiewicz K., Zieliński A., Skibicki S., Marchewka Ł.: Foundation Piles—A New Feature for Concrete 3D Printers. Materials (2021) 14 (10) 1-26. https://doi.org/10.3390/ma14102545
  6. Kaszyńska M., Zieliński A., Skibicki S.: Projektowanie drogowych tymczasowych barier ochronnych dla samochodów osobowych. Przegląd Budowlany (2021) 5-6, 18-25.
  7. Cendrowski K., Pachnowska K., Wierzbicka J., Kucharski P., Prątnicki F., Augustyniak A., Mijowska E., The core-shell titania-silica nanospheres application as photocatalysts for environmental water purification. Nanotechnology IOP (2021) 32, 315703. https://doi.org/10.1088/1361-6528/abf9c5
  8. Cendrowski K., Kukułka W., Wierzbicka J., Mijowska E., The river water influence on cationic and anionic dyes collection by nickel foam with carbonized metal-organic frameworks and carbon nanotubes. Journal of Alloys and Compounds (2021) 876, 160093. https://doi.org/10.1016/j.jallcom.2021.160093
  9. Sikora P., El-Khayatt A.M., Saudi H.A., Chung S.-Y., Stephan D., Abd Elrahman M. Evaluation of the effects of bismuth oxide (Bi2O3) micro and nanoparticles on the mechanical, microstructural and γ-ray/neutron shielding properties of Portland cement pastes. Construction and Building Materials (2021) 284, 122758. https://doi.org/10.1016/j.conbuildmat.2021.122758.
  10. Sikora P., Chung S.-Y., Liard M., Lootens D., Dorn T., Kamm P.H., Stephan D., Abd Elrahman M. The effects of nanosilica on the fresh and hardened properties of 3D printable mortars. Construction and Building Materials (2021) 281, 122574. https://doi.org/10.1016/j.conbuildmat.2021.122574
  11. Chougan M., Hamidreza Ghaffar S., Sikora P., Chung S.-Y., Rucinska T., Stephan D., Albar A., Swash M.R. Investigation of additive incorporation on rheological, microstructural and mechanical properties of 3D printable alkali-activated materials. Materials and Design (2021) 202, 109574. https://doi.org/10.1016/j.matdes.2021.109574.
  12. Augustyniak A., Sikora P., Grygorcewicz B., Despot D., Braun B., Rakoczy R., Szewzyk U., Barjenbruch M., Stephan D. Biofilms in the gravity sewer interfaces: making a friend from a foe. Reviews in Environmental Science and Bio/Technology (2021) 20, 795-813. https://doi.org/10.1007/s11157-021-09582-0
  13. Strzałkowski J., Sikora P., Chung S.-Y., Abd Elrahman M. Thermal performance of building envelopes with structural layers of the same density: Lightweight aggregate concrete versus foamed concrete. Building and Environment (2021) 196, 107799. https://doi.org/10.1016/j.buildenv.2021.107799
  14. Chung S.-Y., Sikora P., Kim D.J., El Madawy M.E., Abd Elrahman M. Effect of different expanded aggregates on durability-related characteristics of lightweight aggregate concrete. Materials Characterization (2021) 173, 110907. https://doi.org/10.1016/j.matchar.2021.110907.
  15. Tunkiewicz M., Misiewicz J., Sikora P., Chung S-Y. Hygric properties of machine-made, historic clay bricks from north-eastern Poland (former East Prussia): characterization and specification for replacement materials. Materials (2021) 14(21), 6706. https://doi.org/10.3390/ma14216706
  16. Sanytsky M., Kropyvnytska T., Нeviuk I, Sikora P., Braichenko S. Development of rapid-hardening ultra-high strength cementitious composites using superzeolite and N-C-S-H-PCE alkaline nanomodifier. Eastern-European Journal of Enterprise Technologies (2021) 5/6 (113), 62–72. https://doi.org/10.15587/1729-4061.2021.242813
  17. Staciwa P., Sibera D., Pełech I., Narkiewicz U., Łojkowski W., Dąbrowska S., Cormia R., Effect of microwave assisted solvothermal process parameters on carbon dioxide adsorption properties of microporous carbon materials, Microporous and Mesoporous Materials (2021), 314, 110829. https://doi.org/10.1016/j.micromeso.2020.110829
  18. Typek J., Wardal K., Zolnierkiewicz G., Leniec G., Sibera D., and Narkiewicz U., Magnetic Study of ZnMnO3 in ZnO/MnO Nanocomposites, IEEE TRANSACTIONS ON MAGNETICS (2021), 57, NO. 10. DOI: 10.1109/TMAG.2021.3095729
  19. Skibicki S., Kaszyńska M., Federowicz K., Techman M., Zieliński A., Olczyk N., Wróblewski T., Hoffmann M., Druk 3D kompozytów betonowych metodą przyrostową - doświadczenia zespołu szczecińskiego, Inzynieria i Budownictwo (2021), NO. 7
  20. Skibicki S., Techman M., Federowicz K., Olczyk N., Hoffmann M., Experimental Study of Hardened Young’s Modulus for 3D Printed Mortar, Materials (2021), 14, NO. 24. http://dx.doi.org/10.3390/ma14247643
  21. Pelech I., Sibera D., Staciwa P., Kusiak-Nejman E., Kapica-Kozar J., Wanag A., Narkiewicz U., Morawski A. W., ZnO/Carbon Spheres with Excellent Regenerability for Post-Combustion CO2 Capture, Materials (2021), 14(21), 6478 https://doi.org/10.3390/ma14216478
  22. Garbalińska H., Bochenek M., Stasiak M.: Experimental and Modeling Investigations on the Water Sorption Behaviors of Autoclaved Aerated Concrete. Materials (2021), 14 (21) 1-18. https://doi.org/10.3390/ma14216235

2020

  1. Araszkiewicz K., Sikora P.: International Seminar on Circular Economy and Sustainability in Civil Engineering (ISCESCE 2020) ISBN: 978-83-7663-301-5.
  2. Araszkiewicz K.: Value Engineering applicability in design of sustainable, energy efficient buildings. Sustainable Energy Systems (SES-2020), E3S Web of Conferences (2020) 220, 01013. https://doi.org/10.1051/e3sconf/202022001013
  3. Kim D., Sikora P., Araszkiewicz K., Chung S.: Inverse Estimation Method of Material Randomness Using Observation. Crystals (2020) 10 (6) 1-17. https://doi.org/10.3390/cryst10060512
  4. Dixit S., Choudhary D., Singh P., Araszkiewicz K.: Validation of a Formal Framework Model to Improve On-site Construction Productivity: Indian Scenario. Proceedings of the Creative Construction e-Conference (2020), ISBN: 978-615-5270-62-8, 61-68.
  5. Dixit S., Singh P., Araszkiewicz K.: Structure Equation Model for the Successful Implementation of ICT / Automation in Construction Project Management in India. Proceedings of the Creative Construction e-Conference (2020) 54-60. https://doi.org/10.3311/CCC2020-009
  6. Araszkiewicz K., Jakubowska P., Dixit S.: The Contribution of BMS Application Towards the Sustainability and Life Cycle Costs Optimization of Buildings: A Case of Public Utility Facilities in Poland. Proceedings of the Creative Construction e-Conference (2020) 501-517. https://doi.org/10.3311/CCC2020-066
  7. Araszkiewicz K., Szerner A., Wrochna M.: Information Systems Supporting the Optimization of the Prefabrication Process in the Construction Industry — Case Study of a Steel Plant. The 10th International Conference on Engineering, Project, and Production Management (2020) 89-99. https://doi.org/10.1007/978-981-15-1910-9_8
  8. Bochenek M.: Proces wysychania przegród wykonanych z betonu komórkowego klasy 500. Builder (2020) 281 (12) 27-29. https://doi.org/10.5604/01.3001.0014.5217
  9. Federowicz K., Kaszyńska M., Zieliński A., Hoffmann M.: Effect of Curing Methods on Shrinkage Development in 3D-Printed Concrete. Materials (2020) 11 (13) 1-14. https://doi.org/10.3390/ma13112590
  10. Skibicki S., Kaszyńska M., Wahib N., Techman M., Federowicz K., Zieliński A., Wróblewski T., Olczyk N., Hoffmann M.: Properties of Composite Modified with Limestone Powder for 3D Concrete Printing. Second RILEM International Conference on Concrete and Digital Fabrication : Digital Concrete 2020 (2020) https://doi.org/10.1007/978-3-030-49916-7_13
  11. Federowicz K., Figueiredo V., Al-Kroom H., Abdel-Gawwad H., Abd Elrahman M., Sikora P.: The Effects of Temperature Curing on the Strength Development, Transport Properties, and Freeze-Thaw Resistance of Blast Furnace Slag Cement Mortars Modified with Nanosilica. Materials (2020) 13 (24) 1-15. https://doi.org/10.3390/ma13245800
  12. Nowak R., Orłowicz R., Rutkowski R.: Use of TLS (LiDAR) for Building Diagnostics with the Example of a Historic Building in Karlino. Buildings (2020) 10 (2) 1-14. DOI:10.3390/buildings10020024
  13. Kaszyńska M., Skibicki S.: Effect of Protruding Rebar From Casting Element on Temperature Development and Compressive Strength of Mass Concrete. Archives of Civil Engineering (2020) 66 (2) 211-233. https://doi.org/10.24425/ace.2020.131806
  14. Hoffmann M., Skibicki S., Pankratow P., Zieliński A., Pajor M., Techman M.: Automation in the Construction of a 3D-Printed Concrete Wall with the Use of a Lintel Gripper. Materials (2020) 13 (8) 1-15. https://doi.org/10.3390/MA13081800
  15. Paczkowski W., Skibicki S., Wróblewski T.: Skanowanie laserowe stalowej konstrukcji elektrowni węglowej. Builder (2020) 273 (4) 22-25. https://doi.org/10.5604/01.3001.0013.8793
  16. Wierzbicki K., Szewczyk P., Paczkowski W., Wróblewski T., Skibicki S.: Torsional Stability Assessment of Columns Using Photometry and FEM. Buildings (2020) 10 (9) 1-19. https://doi.org/10.3390/BUILDINGS10090162
  17. Kaszyńska M., Skibicki S., Hoffmann M.: 3D Concrete Printing for Sustainable Construction. Energies (2020) 13 (23) 1-28. https://doi.org/10.3390/en13236351
  18. Pełech I., Sibera D., Staciwa P., Narkiewicz U. and Cormia R., Pressureless and Low-Pressure Synthesis of Microporous Carbon Spheres Applied to CO2 Adsorption, Molecules, (2020), 25, 5328. https://doi.org/10.3390/molecules25225328

2019

  1. Araszkiewicz K.: Digital construction and its role in driving the circular economy. Automation and Robotics in Construction: proceedings of the Creative Construction Conference (2019), 672-681.
  2. Araszkiewicz K., Bochenek M.: Control of construction projects using the Earned Value Method - case study. Open Engineering (2019) 9 (1) 186–195. https://doi.org/10.1515/eng-2019-0020
  3. Cieślewicz W., Araszkiewicz K., Sikora P.: Accident Rate as a Measure of Safety Assessment in Polish Civil Engineering. Safety (2019) 5 (4) 1-16. https://doi.org/10.3390/safety5040077
  4. Araszkiewicz K., Sikora P., Brzozowski P.: International Seminar on Sustainability. Economics and Safety - ISSES (2019) ISBN: 978-83-7663-282-7.
  5. Nowak R., Orłowicz R.: Selected problems of failures and repairs of historic masonry vaults. MATEC Web of Conferences (2019) EISSN: 2261-236X, 284, 1-8. https://doi.org/10.1051/matecconf/201928405008
  6. Nowak R., Orłowicz R., Bezpałow W.: Badania ceglanych sklepień koszowych. Przegląd Budowlany (2019) 3, 19-21.
  7. Nowak R., Orłowicz R., Bezpałow W.: O badaniach ceglano-betonowych stropów odcinkowych. Inżynieria i Budownictwo (2019) 3, 107-109.
  8. Nowak R., Orłowicz R., Derkacz V., Galuk A.: Wpływ obciążenia skupionego pod kątem do spoin wspornych na wytrzymałość muru na ściskanie. Materiały Budowlane (2019) 2, 47-49. https://doi.org/10.15199/33.2019.02.10
  9. Nowak R., Orłowicz R.: Wpływ stanu technicznego muru na nośność zabytkowego łuku w Sankt Petersburgu. Materiały Budowlane (2019) 5, 34-35. https://doi.org/10.15199/33.2019.05.05
  10. Nowak R., Orłowicz R.: Wybrane zagadnienia awarii i napraw historycznych sklepień ceglanych. Awarie budowlane : zapobieganie, diagnostyka, naprawy, rekonstrukcje : monografia (2019) ISBN: 978-83-7663-286-5, 5, 433-436.
  11. Nowak R.: Strengthening and Repair Methods for Brick Arched Balconies. IOP Conference Series : Materials Science & Engineering (2019) 471, 1-6. https://doi.org/10.1088/1757-899X/471/5/052056
  12. Paczkowski W., Skibicki S.: Korozja jako przyczyna awarii stalowej konstrukcji wsporczej rurociągu. Awarie budowlane : zapobieganie, diagnostyka, naprawy, rekonstrukcje: monografia (2019) ISBN: 978-83-7663-286-5, 449-452.
  13. Paczkowski W., Skibicki S.: Corrosion as a cause of the failure of the pipeline steel supporting structure. MATEC Web of Conferences (2019) 284, 1-12. https://doi.org/10.1051/matecconf /2019284
  14. Zieliński A.:, Kaszyńska M., Skibicki S., Olczyk N.: Development of Autogenous Shrinkage Deformation and Strength Parameters in Self-Consolidating Concrete with Light and Natural Aggregate. IOP Conference Series : Materials Science & Engineering (2019) 471, 1-8. https://doi.org/10.1088/1757-899X/471/3/032019
  15. Kaszyńska M., Olczyk N., Techman M., Skibicki S., Zieliński A., Filipowicz K., Wróblewski T., Hoffmann M.: Thermal-Humidity Parameters of 3D Printed Wall. IOP Conference Series: Materials Science & Engineering (2019) 471, 1-9. https://doi.org/10.1088/1757-899X/471/8/082018
  16. Borucka-Lipska J., Techman M., Skibicki S.: Use of contaminated sand blasting grit for production of cement mortars. IOP Conference Series: Materials Science & Engineering (2019) 471, 1-6. https://doi.org/10.1088/1757-899X/471/3/032055